Fisher-Price Sizzle'n Glow Grill Quick Start Manual

Parts
CAUTION
Please keep small parts and plastic
bags out of children's reach.
Dispose of plastic bags properly.
Accessories Not Shown: Spatula, Tongs, 2 Chicken Legs,
Hot Dog, Hamburger, Cheese, Two-Piece Hamburger Bun,
Hot Dog Bun, Mustard Bottle.

Battery Installation

Battery
Compartment
Door
1.5V x 2
"AA" (LR6)
Shown Actual Size
Preparation
Legs
Tray
Hooked
Tab
Slots
• Turn the grill upside down on a flat surface.
• Insert and snap the leg assembly into the openings
in the grill.
• Please save these instructions
for future reference.
• Adult assembly is required.
• Tool needed to install batteries:
Phillips Screwdriver.
• This product requires two size
"AA" (LR6) alkaline batteries
(not included).
Cover
Warming Rack
Grill
3 Legs
Tray
• Turn the grill upside down on a flat surface.
• Loosen the screw in the battery compartment door with a Phillips
screwdriver.
• Lift to open the battery compartment door.
• Insert two size "AA" (LR6) alkaline batteries as indicated inside the bat-
tery compartment.
• Replace the battery compartment door and tighten the screw with a
Phillips screwdriver. Do not over-tighten.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove
exhausted batteries from the product. Battery leakage and corrosion
can damage the product.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the
"Battery Installation" instructions are to be used.
• If removable rechargeable batteries are used, they are only to be
charged under adult supervision.
• Rechargeable batteries are to be removed from the product before
they are charged.
• If you use a battery charger, it should be examined regularly for
damage to the cord, plug, enclosure and other parts. Do not use a
damaged battery charger until it has been properly repaired.
• Position the tray upside-down.
• Insert and snap the hooked tab on each of the three legs into
the slots in the tray.
Leg
Assembly
Openings
Grill
Product Number: 73319