Semtech XE8000 ProStart II User Manual page 16

You can see an example upload of a second generation XE8000 (XE88LC02-06A-07A & XE1283) below
D:\Projet\XELoader\Release> XELoader 2 COM2 -u prostartdemo1.bin -c
ProStart Info:
-> Loader : V 3.2
-> Mother Board : V 3.2
-> Device type : 2
Sending ProStartKit parameters...
File Info:
-> File Name
-> Program Size
-> File CheckSum
Programming Status:
|< Erasing FLASH memory...
|
Uploading FLASH memory...
0%|<----------------->|100%
|||||||||||||||||||||
Checking FLASH memory programing...
FLASH memory Upload finished...
Programing Status:
Erasing
Write Blocking Bits
Write Data
Calculated CheckSum
XE8000 CheckSum
Programming OK...
or
Programming status : Failed
Try to download again or change the chip!
Detailed Status:
Low margin : Failed
or
Programming status : Failed
This device may be used for debugging purpose
Detailed Status:
Low margin : Ok
High margin : Failed
Nom. margin : Ok
or
Programming status : Failed
Try to download again or change the chip!
Detailed Status:
Low margin : Ok
High margin : Failed
Nom. margin : Failed
D:\Projet\XELoader\Release>
The difference between the two uploads are
•
Time of erasing shorter for second generation
•
Margin checks at the end of the upload for the second generation
© Semtech 2006
= C:\_Last_.axe
= 2907 instructions.
= 0x122556
= 1
= 1
= 1
= 0x122556
= 0x122556
XE8000 ProStart II
16
User Guide
www.semtech.com