Adaptec ICP5045BL User Manual page 9

agent failed to start" displays when starting the server.
The server is unable to load the Storage Manager agent.
usually caused by loading Java before the Storage Manager agent.
In the file Autoexec.ncf, move the line "LOAD RAIDAGNT -BOOT"
so that it is before any lines that reference Java.
- A NetWare system can run only one instance of the Adaptec Storage
Manager agent.
- Under Novell NetWare 6.5, you cannot initialize a drive using
Adaptec Storage Manager. You must use the BIOS Array
Configuration Utility (ARC).
--------------------------------------------------------------------
(c) 2005 Adaptec, Inc. All Rights Reserved. This software contains
valuable trade secrets of Adaptec or its licensors. The software is
protected under international copyright laws and treaties.
This software may only be used in accordance with the terms of its
accompanying license agreement. No part of this publication may be
reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording or
otherwise, without prior written consent of Adaptec, Inc.,
691 South Milpitas Blvd., Milpitas, CA 95035.
This is