Table of Contents
Advertisement
GETTING STARTED WITH THE VV
Receiving Inspection
After unpacking the assembly, check carefully for shipping damage. If any damage is found, report it immediately to the
delivering carrier. During unpacking and installation, do not handle the valve by the inlet cone shaft or center shaft support
bracket. Damage may result from improper handling.
CAUTION
Do not tamper with the linkage assembly as the valve is shipped
factory calibrated. Never carry or lift the valve by the linkage assembly
support brackets, or control box.
In the Box
For each of the available options, the order includes the following components outlined in this section.
3 | VV – Manual | AntecControls.com
Constant Volume (CV) Venturi Valve
CV valves will ship with the below components.
Component
Quantity
Valve Body
1, 2 or 3
Constant Volume
1, 2 or 3
Assembly
NOTE:
The Constant Volume Assembly must be field assembled after installation.
Variable Air Volume (VAV) Venturi Valve
VAV valves will ship with the below components.
Component
Quantity
Valve Body
1, 2 or 3
Green Pressure
1
Tubing
Red Pressure
1
Tubing
Actuator
1 or 2
Controls Enclosure
1
Controller
1
Description
Venturi Valve
NOTE:
Dual and Triple CV valves will be shipped as
a ganged assembly. Each individual valve body will
come with its own Constant Volume Assembly.
Single constant volume assembly.
Description
Venturi Valve
Dual and Triple VAV valves will be shipped
NOTE:
as a ganged assembly.
The low-pressure tubing comes factory installed
connected to the valve's control system and a
connector tee for field verification.
The high-pressure tubing comes factory installed
connected to the valve's control system and a
connector tee for field verification.
The actuator is factory mounted on the mounting
bracket and shaft.
NOTE:
Triple valves will be shipped with 2
actuators.
Enclosure for the controls system.
PACE, FHC, or LMX are factory installed in the
control's enclosure.
VV
Hide quick links:
Advertisement
Table of Contents
