Silencer (Vvsil) - Price Antec Controls VENTURI VV Series Manual

Silencer (VVSIL)

Silencer (VVSIL) is a highly engineered 14 inches silencer specifically designed for the full spectrum attenuation of sounds
produced by Venturi Valves. The packless design provides minimal disturbance in the airflow resulting in low pressure drops
across the silencer.
Overview
See the VVSIL Product Submittal on AntecControls.com for specifications and dimensions.
Options
VV Silencer
Model: VVSIL
Features: • Factory Mounted Transitions
• Slip Connection
• Made to fit Single, Dual, Triple, or Quad valve
• 22ga Galvanized Steel Construction or 24ga 316 Stainless Steel Construction
Installation
17 | VV – Manual | AntecControls.com
STEP 1
Position silencer before the inlet of the Venturi Valve when the Venturi Valve is operating as
an exhaust valve. Position silencer on the discharge of the Venturi Valve when the Venturi
Valve is operating as a supply valve.
STEP 2
It is recommended that the silencer be installed prior to installing the Venturi Valve.
STEP 3
Use the support method prescribed for the duct work in the job specifications.
STEP 4
Mount the silencer to the duct. The slip connection should overlap a minimum of one inch
(1") to ensure a proper fit.
STEP 5
Mount the Venturi Valve by slipping the appropriate end into the available duct work and the
other end into the free slip connection of the silencer. Each slip connection should overlap a
minimum of one inch (1") to ensure a proper fit.
STEP 6
Fasten all connections using six (6) sheet metal screws per slip connection.
STEP 7
Seal slip connections using duct sealer.
VV