Price Antec Controls VENTURI VV Series Manual page 10

Control Type
The control type specifies whether the valve is provided with controls and an actuator or is a mechanically fixed assembly.
Constant Volume
Model: VV-CV
Features: • Mechanical linkage to lock the valve in place
• If airflow adjustments are required, they are done manually
• Mechanical linkage must be assembled in the field prior to
• No controls are required
•
Variable Volume
Model: VV-VAV
Features: • Actuator controls the valve's position to control to desired
• Available with factory provided PACE, FHC or LMX
• Factory provided actuator is calibrated and wired
• Linkage is set to provide full range of airflow control
Connection Type
The connection type of the valve will determine how the valve is installed in the ductwork. See the Installation Instructions
section for more detail on the installation process.
Slip
Model: VV-SL
Features: • Venturi Valve does not contain any mounting holes
• Single sizes are designed to slip into nominal sized round
• Dual, Triple and Quad sizes are designed to slip over
NOTE:
installation instructions.
Flanged
Model: VV-FL
Features: • Venturi Valve comes with pre-welded mounting flange
NOTES:
• See the
• See the VV Product Submittal for hole pattern and
Coating
Venturi Valves are available in four different protective coating options depending on the application.
8 | VV – Manual | AntecControls.com
turning on the air handler
Optional: Valve Pressure Switch (VPS) can be included for
alarming
airflow setpoint
ductwork
rectangular ductwork
See the Installing the Venturi Valve
Installing the Venturi Valve
instructions.
dimensions.
for detailed
for detailed installation
VV