Table of Contents
Advertisement
9 Click Finish to complete the installation.
Note: If the driver is not listed or is not loading properly, see
the troubleshooting suggestions on page 22.
Windows NT 4.0
The current version of Windows NT 4.0 has embedded driver
support for the SCSI Card 2906 as part of the installation software.
Before you install the Windows NT driver from the embedded list,
download either the latest Microsoft service pack or the Adaptec
driver file 7800wnt.exe from the Adaptec support Web site at
www.adaptec.com.
For additional instructions on installing embedded driver support,
refer to the OS documentation.
Once your SCSI Card 2906 is installed and you have restarted your
computer, follow these steps:
1 Click Start, point to Settings, then double-click Control Panel.
2 Double-click SCSI Adapters.
The SCSI Adapters window opens.
Windows NT 4.0
16
Advertisement
Table of Contents
Troubleshooting
