Adaptec AVA-2906 User Manual page 29

Macintosh OS 9.x
1 Open the Mac OS 9.x folder on your SCSI
Card 2906 CD and double-click on the
installer icon shown at right.
2 Follow the instructions displayed on the screen. Files will be
installed as follows:
Adaptec SCSI Card 2906 driver will be installed in the
I
System Folder/Extension
SCSIProbe will be installed in the System Folder/Control
I
folder of your system disk.
Panels
See the table on Information for Macintosh Users on page 38 for
details on Mac OS 9 utilities and drivers.
3 Restart the computer to complete the installation. The
SCSIProbe control panel makes drives available on your
desktop after system startup.
4 Ensure that the Mount Drives at Startup option on the
SCSIProbe control panel is checked. If it is not checked, your
drives will not show up on the desktop when you start your
system.
Macintosh OS X
The driver is not embedded in early releases of Mac OS X (for
example, OS X 10.0 through 10.0.4). To install or update the driver,
follow the steps in this section.
Note: Some utilities may not be compatible with Mac OS X. Check
the Adaptec Web site at www.adaptec.com for the latest information.
Warning: Do not run the installer if you have changed the
permissions for any of the directories on this path: /System/
Library/Extensions
Also, do not run the installer if you have set up any of these
directories to be symbolic links (similar to aliases in OS 9); the
system may not function properly.
folder of your system disk.
; the driver might overwrite these directories.
Macintosh OS 9.x
20