Dab/dab+ – fm - bluetooth - internet radio spotify connect- music player for use with bang & olufsen speakers, control with bang & olufsen remotes (11 pages)
Cable receiver with internal stb for bang & olufsen tv (10 pages)
Summary of Contents for OneRemote Radio PL3
Page 1
OneRemote Radio PL3 Advanced receiver for Bang & Olufsen BeoLab PowerLink speakers, handling Internet Radio – Spotify UPnP Music Player – Podcast Installation Guide 30012013s1uk...
ABOUT ONEREMOTE RADIO PL3 Select music or broadcasts to be handled by the OneRemote Radio PL3 via the UNDOK app on one or more Apple or Android devices. Use either the built- in Internet Radio or stream from other sources.
CONNECTIONS POWERLINK SPEAKER CABLE The OneRemote Radio PL3 connects to BeoLab speakers with a PowerLink cable with 8 pin DIN connectors. These connectors hold both the right and the left channel signals. The speakers connect as in any other Bang & Olufsen setup in one of the two following ways: 1.
INSTALLATION When delivered the OneRemote Radio PL3 is factory reset, in which condition it operates as a WLAN Access Point, thus creating its own WiFi network. The first step is to connect a smart phone or tablet to this network enabling connection of the Radio PL3 to the home network.
Page 6
The Radio PL3 has been configured The system has been configured Acquire and install the app UNDOK. and restarts to connect to the home and is ready to use. network. Press start to use my sound system. The app opens and shows available...
Page 7
The OneRemote Radio PL3 may be used following the directions in the User Guide. www.oneremote.dk...