OneRemote Interface Type 2843 User Manual

Operating with Beolink 1000
Beolink 1000 does not have as many
keys as the receiver's original remote
control. Thus certain Beolink 1000
keys have got alternative functiona-
lity. To get to this has to be
p
pressed first, i.e. followed by
p
1 on a Beolink 1000 corresponds to
Setup on the original remote control.
The table shows how special Beolink
1000 key operations translate to
operations of the original remote
control.
To be able to operate the receiver
correctly with the Beolink 1000 the
user has to be familiar with operations
with the original remote control as
described in the receiver's user
manual.
The receiver is automatically turned
on when selecting its source on the
TV with Vtape, DVD, Vaux etc.
.
We call this function
i
There is therefore no physical button
on the Beolink 1000 named source.
Beolink 1000 Operation
pp OK
q Menu
x Exit
pC TXT
pV Lang
pZ
Recall
pX Info
hZ TV
hX Radio
hC EPG
hV FAV
p1 Setup
i Power on
ifq Power off
Page 4
made in the EU by
Type 2843v1
Beocompatible Operation via
Oneremote Interface Type 2843
Smart Terra X
for
www.oneremote.dk