Advertisement
INSTALLATION
When delivered the OneRemote Radio PL3 is factory reset, in which condition it operates as a
WLAN Access Point, thus creating its own WiFi network.
The first step is to connect a smart phone or tablet to this network enabling connection of the
Radio PL3 to the home network.
The installation is shown with an iPhone, but the procedure for Android is similar.
The iPhone connects to the network
DigitRadio_MR1 available from the
OneRemote Radio PL3.
www.oneremote.dk
The Radio PL3 connects to the home
network.
Select cable or WiFi..
Wi-Fi is selected and all networks
within reach are listed.
The home network is chosen and
entering a password may be
rquired.
5
Advertisement
