Dab/dab+ – fm - bluetooth - internet radio spotify connect- music player for use with bang & olufsen speakers, control with bang & olufsen remotes (11 pages)
Page 1
OneRemote Radio PL2 Advanced Receiver for Bang & Olufsen BeoLab PowerLink Speakers handling DAB/DAB+ – FM - Internet Radio – Spotify - Bluetooth – UPnP – Podcast User Guide Control with Bang & Olufsen Remotes 30012012u1uk...
Store current channel as preset 4 Store current channel as preset 5 Store current channel as preset 6 Store current channel as preset 7 Store current channel as preset 8 Store current channel as preset 9 Store current channel as preset 10 www.oneremote.dk...
Music Player..................................7 Spotify Connect Reception ..............................7 Bluetooth Reception ................................7 CONTROL THE RADIO PL2 VIA AN APP FOR SMARTPHONE, TABLET AND PC...... 8 Apps for Apple iOS, iPhone, iPad and MAC........................8 App for Androids ................................. 8 Spotify ....................................
• Radio PL2 can also be controlled via iPhones, iPods, iPads and Android telephones and tablets using the UNDOK app. Connect Radio PL2 to a set of Bang & Olufsen BeoLab speakers with PowerLink sockets and Radio Pl2 may be controlled immediately with a Bang and Olufsen remote.
SELECT SERVICE DAB RECEPTION Turn on the Radio PL2 with u, and it starts playing the source most recently played. Go to DAB radio by pressing The Radio PL2 is stepping through the various sources until DAB radio is reached. See ”Source Synchronization”...
FM RECEPTION Turn on the Radio PL2 with u, and it starts playing the source most recently played. Go to FM radio by pressing The Radio PL2 is stepping through the various sources until FM radio is reached. See ”Source Synchronization”...
Radio PL2 is waiting for a connection from a source. Turn on a Bluetooth source and pair it with the Radio PL2. The password is ”0000”. The stops blinking when the pairing has been completed.
APPS FOR APPLE IOS, IPHONE, IPAD AND MAC. The Radio PL2 can be fully controlled via WiFi with the app UNDOK for iPhones, iPads and MAC computers. The free UNDOK may be downloaded from the App Store.
If the OneRemote Radio PL2 is connected to WiFi in the ”Keep connected” mode, Spotify can always take over, and it may even turn on the Radio PL2, if it is turned off. Thus select Main Menu/System Setup/Internet Setup/Keep Connected and set ”yes” for optimal Spotify control.
Though in some cases Radio PL2 has obviously lost the sync. and is missing the desired source. This happens if the Radio PL2 has been controlled via the UNDOK app or Spotify. Select the Bluetooth source with I to get back in sync.
Alarm indications are shown at the bottom of the display. SLEEP The OneRemote Radio PL2 can be set to turn off after 15, 30, 45 or 60 minutes. Press repeatedly until the desired time period is displayed. Deleting a set sleep interval follows the same procedure, until OFF is displayed.
. Lists are easy to create and an overview of the thousands of available stations is favorable. A FREE account may be created and ”Access Code” for each Radio PL2 using the created lists added. An Access Code is the Radio PL2 receivers ID or password.
OLDER BANG & OLUFSEN REMOTES All Bang & Olufsen system remotes may be used to control the OneRemote Radio PL2. Over the years Bang & Olufsen has marketed different models where keys have been added, removed or namechanged. The good example is the old P,that was later called Oand finally turned into a small joystick.
Store current channel as preset 4 Store current channel as preset 5 Store current channel as preset 6 Store current channel as preset 7 Store current channel as preset 8 Store current channel as preset 9 Store current channel as preset 10 www.oneremote.dk...
Need help?
Do you have a question about the PL2 and is the answer not in the manual?
Questions and answers