Advertisement
ANA-7711 GS.fm Page 2 Thursday, April 24, 2003 9:53 AM
System Requirements
Intel Pentium or equivalent computer
At least 128 MB of RAM
An available 3.3-V keyed PCI slot
CD-ROM drive
Gigabit Ethernet (GbE) copper (CAT 5 or CAT 6) or SC fiber cable
Note:
The cable is not included in the kit. To order cables for
your NAC, see the Got Cables? flyer in the kit or visit Adaptec's
online store at
1000/100 Mbps full-duplex connection to the network.
Installing the ANA-7711C/F NAC
To install the NAC in an available 3.3-V keyed PCI slot:
1 Turn off the power to the computer and disconnect the power cord.
2 Before handling the board, discharge any static electricity from your
body by touching a grounded metal object such as the exposed metal
parts on the back of your computer.
3 Remove the cover from the computer case. If necessary, refer to the
instructions in your computer documentation.
or call 1-800-442-7274.
www.adaptecstore.com
2
Advertisement
