Quickster Assembly; Step 1–Base Frame And Tension-Tite™ Arm Pole Assembly; Step 2–Connect The Net To The Frame - SKLZ PRACTICE PLAY WIN QUICKSTER Setup Instructions

QUICKSTER ASSEMBLY:
™
STEP 1–BASE FRAME AND TENSION-TITE™ ARM POLE ASSEMBLY
NOTE: Base Frame and Tension-Tite arm poles come pre-attached by elastic.
Layout one Tension-Tite Arm Pole (C) and link
together to form a straight pole. Repeat with second
Tension-Tite Arm Pole. Layout Base Frame (B) and
link the frame together. Make sure to secure the
poles with the push buttons.
NOTE: The slight bowing on the Base Frame is part
of the Tension-Tite system design.
Slide the Tension-Tite Arm Poles into each side of
the Base Frame.
NOTE: Ensure arm poles are fully inserted. Failure to
do so may result in damage to the Quickster.
STEP 2–CONNECT THE NET TO THE FRAME
Unfold the Net (A) and slide the metal pin at the top of the net into the top
of the Tension-Tite Arm Pole. Make sure that the Quickster logo on the net is
facing away from the frame. Repeat on the other side.
Lift up the base pole to connect the grommets on the bottom of the net to
each side of the frame.
NOTE: Check the frame to make sure it is securely and fully assembled with
the net before securing to the ground.
QuicksterNets_6x6_InstrV1.indd 4
1.
2.
Grommet attachment
C
Push Button Attachment
B
1.
2.
C
1.
2.
10/12/11 5:01 PM