Assembly Steps - KWIK GOAL 2B2 Assembly Instructions

4. Assemble rails, bases and posts as shown.
w/o swage
5. Attach net to goal using net fastener, provided. Be sure to cut
net fastener into 9"-10" pieces to ensure 2" overlap.
Post
Base
Rail
w/ swage
Top Corner
Tag
Net
Fastener
Rubber Pad
Net
Fastener
Rail
w/o swage
Rubber Pad
Rail
w/ swage
PUSH
Rail
6. Use ground anchors to fasten goal to playing field as
shown.
NOTE FOR INDOOR USE: Rubber pads can be added to
bottom of goal by peeling off paper to expose
adhesive. Place rubber pads on post and rails at
locations shown.
Ground
Anchor
Ground
Anchor
Ground
Anchor
Rail
w/ swage
Rail
w/o swage
Base
Post
Ground
Anchor
Rubber Pad
Post
Rubber
Pad
NZ73 Rev. 01/13/11