KWIK GOAL 2B1602 AFR-2 Assembly Instructions

ASSEMBLY INSTRUCTIONS FOR 2B1602 AFR-2 REBOUNDER

1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify trucking company immediately. Lay out all parts. Remove all cardboard and packaging immediately.
Wet or damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
All sports equipment must be anchored at all times. Sports equipment not in use must be
disassembled and stored in a safe, secure place. Assembled sports equipment should not be left
unattended. Do not use this equipment during the threat of high winds. Sports equipment should
be checked for safety on a regular basis. Any modifications to this or any Kwik Goal product will
(P) 215- 536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Most Kwik Goal products carry a Lifetime Guarantee. For details or
claims, visit kwikgoal.com or contact customer service at
Left Side Bar (1)
(Part#UZ614)
Right Side Bar (1)
(Part#UZ613)
Post (2)
(Part#UZ495)
Ground Shoe (2)
(Part#UZ526)
void any and all warranties.
140 Pacific Drive Quakertown, PA 18951
Visit our website @ kwikgoal.com
©
1998, Rev 2012 Kwik Goal Ltd.
***CAUTION***
1-800-531-4252
®
Net (1)
(Part# 3B806)
Ground Anchor Peg (1)
(Part# UZ847)
Caplug (4)
(Part# VZ235)
Roll Pin (2)
(Part# TZ200)
Bungee (20)
(Part# VZ394 Pack of 10)
.
NZ134 Rev. 8/1/12