Klarstein MONTBLANC Manual page 23

To remove aluminiumfilters press the metal tab
back, remove the filter (one at a time) and
gently pull down. After washing and drying
them, places the filters following the passages
of the assembly in inverse form.
Lamp Change
1 Before changing the bulbs, sure that the hood is not connected.
2 Grasp the metal ring of the bulb, pull down and remove halogen cavity. Pic.12
3 Replace the bulb with a new one with the same characteristics.
Note: In several models the lamp or
LED changes completely.
Connector
EN
23