Advertisement
Quick Links
2 SIDED & 3 SIDED ALCOVE
Important!
1. When you receive your Anita shower check contents for any freight damage or defects.
2.
3. Do not proceed with installation until resolved as there cannot be a valid claim later.
JULY 2020
Anita 2 Sided and 3 Sided Alcove
INSTRUCTION MANUAL
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for NewLine Anita 2 Sided
Summary of Contents for NewLine Anita 2 Sided
- Page 1 Anita 2 Sided and 3 Sided Alcove INSTRUCTION MANUAL 2 SIDED & 3 SIDED ALCOVE Important! 1. When you receive your Anita shower check contents for any freight damage or defects. 3. Do not proceed with installation until resolved as there cannot be a valid claim later.
-
Page 2: Warranty
IMPORTANT INFORMATION WARRANTY • Faulty goods are covered under warranty. Visit www.newline.nz for warranty information. • Breakages incurred during installation are not covered under warranty. • Installations must conform to the instructions to be covered by the warranty. HEALTH AND SAFETY Toughened Glass: •... -
Page 3: Preparation Checklist
Wet Grade lining: Aqualine Gib. or equivalent “must be used behind all shower installations for compliance” Plumbing: Use a registered plumber for installation all supply and waste items prior to tray and wall linings. This must comply with AS/NZS 4858:2004 and be undertaken by www.newline.co.nz Tiling: Code. - Page 4 ANITA SHOWER - ASSEMBLY DIAGRAM REF. DESCRIPTION PART NO. REF. DESCRIPTION PART NO. Rail K8618 H8601 Rail Joiner Assembly K0970 Gasket + Wall Cap Set Wall Gaskets Buffer Strip Wall Cap I6105 Buffer/Seal Strip Threaded Screws M5 x 10 I8526 Handle Set K1519 I8595...
- Page 5 RETURN GLASS EDGE: OPTION A: ANITA ACRYLIC SHOWER (APPLIES TO 1200 X 915) Anita Acrylic Shower with Newline Acrylic Tray and ABS/Acrylic Liner: 20mm in from the outside edge of the tray. This will allow for walls leaning or bowed inwards by 4mm. Greater variances will need to be calculated using the MIn/Max table below.
- Page 6 ANITA SHOWER: TILE WITH PROFINISH TILE TRAY - LAYOUT PLAN B NOTE: All measurements the walls are plumb and all measurements provided. IMPORTANT DETAIL DOTTED LINE: RETURN GLASS EDGE: OPTION B: ANITA TILE SHOWER WITH PROFINISH TILE TRAY 1. Mark out the boundary line using the Minimum to Maximum table below. This will allow for walls leaning or bowed inwards by 4mm.
- Page 7 ANITA ALCOVE (DOOR ONLY) - LAYOUT PLAN C Rail Joiner: OPTION C: ANITA ALCOVE (1200 DOOR SET) WITH TILE Mounted on door side Depth The following table covers the Door Size with the Minimum and Maximum Range. Care must be taken if using the Dotted Line: minimum or maximum measurements as discrepancies in Outer boundary...
- Page 8 ANITA SHOWER - INSTALLATION INSTRUCTIONS Identify the specific layout plan applicable to your specific shower. Use the correct layout plan in conjunction with the installation instructions. Mark out the wall channels taking into account the guidance notes. Acrylic: re-penetration of TILE: Acrylic: channel remains plumb.
- Page 9 to hold. wall channel. The return panel leading edge is positioned 4mm back from the outer channel line as in the layout As this effects the door running parallel at the bottom. ENSURE A PLASTIC GLASS PROTECTOR IS USED BETWEEN ALL METAL PARTS AND THE GLASS RAIL GLASS FIXED GLASS...
- Page 10 Hang the door on the rail from inside of the shower. Carefully slide the door toward the return panel and check the gap between door and return panel assess if the return panel needs to go in or out slightly to align the door parallel to the tray. WATER DEFLECTOR (19)
- Page 11 CHANNEL WALL REMAIN LEVEL DURING...
- Page 12 The screen is designed to allow the water to return into the shower area, if any is present. SCREENS THAT ARE SEALED ON THE INSIDE WILL VOID WARRANTY. P: 0508 639 5463 | 09 444 2053 E: info@newline.co.nz www.newline.co.nz...
Need help?
Do you have a question about the Anita 2 Sided and is the answer not in the manual?
Questions and answers