Toshiba B-SX6T Series Supply Loading Instructions page 3

7.
Place the assembled Media Holder onto the Supply Holder Frame, and feed the media between the two Media
Guides.
Turn the Locking Lever of the Media Holder to the "Open" position, and push the Media Holders toward the
centre to place the media at the centre on the Supply Shaft. Then, lock the position of the media by returning the
Locking Levers to the "Close" position.
Be careful not to pinch your fingers or hands by the Supply Holder Frame or Media Holders when
loading the media.
Prenez garde à ne pas vous pincer les doigts lorsque vous manipulez le cadre support média ou les
guides lors du chargement média.
Close Open
Locking Lever
Media Holder Frame
8.
Feed the media until it extends past the Platen.
9. Move the Media Guides inside, causing the media to be automatically centred. Then, tighten the Media Guide
Screws to secure the Media Guides.
Media Guide Screw
AVERTISSEMENT!
Media
Media Guide
WARNING!
Place the bushes of the Supply Shaft into the
notches of the Supply Holder Frame securely.
Media
Notch
3
NOTE:
Bush