Advertisement
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Screw driver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective
treatment:
1. Remove all of the labels(part 1);
2. Unscrew the screws on part 2, and then remove part 2.
3. Unscrew the screws on part 3, and then remove part 3.
4. Unscrew the screws on part 4, and then remove part 4.
5. Extract all of the part 5.
6. Extract all of the part 6.
7. Unscrew the captive-screws on part 7, and then remove part 7 from part 8.
8. Remove the shielding fingers 3-1 from part 3.
9. Remove the film 3-2 from part 3.
10. Remove the shielding fingers 4-1 from part 4.
11. Remove the film 4-2 from part 4.
12. Remove the spring bottom 5-1 from part 5.
13. Remove the shielding fingers 6-1 from part 6.
14. Unscrew the screws on part 7-1, and then remove part 7-1 from part 7.
15. Unscrew the screws on part 7-2, and then remove part 7-2 from part 7.
16. Unscrew the screws on part 7-3, and then remove part 7-3 from part 7.
17. Unscrew the screws on part 7-4, and then remove part 7-4 from part 7.
18. Unscrew the screws,and then disassemble part 7-3.
19. Unscrew the screws,and then disassemble part 7-4;
20. Unscrew the screws on part 8-1, and then remove part 8-1 from part 8.
21. Unscrew the screws on part 8-2,and then pull out part 8-2.
22. Remove the insulating film and shielding fingers from part 8-2.
23. Unscrew the screws on part 8-3, and then remove part 8-3 from part 8-4.
24. Unscrew the screws on part 8-4, and then remove part 8-4 from part 8.
25. Unscrew the screws and guide pins on part 8-5-1, and then remove it from 8-5.
26. Unscrew the screws on part 8-5-2, and then remove them from 8-5.
27. Unscrew the screws on part 8-5-3, and then remove them from 8-5.
28. Remove the insulating film from part 8-5-3.
29. Unscrew the screws on part 8-5-4, and then remove all of the die-casting parts;
30. Unscrew the screws on part 8-5-5, and then remove them from part 8-5.
EL-MF877-00
Template Revision B
Tool Size (if
applicable)
2#
Page 2
Advertisement
