Important Safety And Installation Instructions - Askoll ENERGY SAVING ES2 Installation And Operation Instructions Manual

Hide thumbs Also See for ENERGY SAVING ES2:
Table of Contents

Advertisement

ENERGY SAVING

4 Important safety and installation instructions

Prior to installation, read these installation and operating instructions. The installation and
operation should also be in accordance with national regulations and accepted codes of good
practice.
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge, only if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
To guard against injury, basic safety precautions should be observed,
including the following:
1. Read and follow all safety instructions and all the important notices on
the appliance before installing, using and maintaining the circulator. failure to
do so may cause personal injury or damage to the circulator or installation.
2. Always disconnect electrical supply before putting on or taking off parts
and whilst the equipment is being installed, maintained or handled. Never work
with bare feet and/or with wet hands.
3. To avoid possible electric shock, special care should be taken since
water is used with electrical equipment. Carefully examine the circulator
before and after installation. Do not operate the circulator if it has a damaged
supply cord or enclosure, or if it is malfunctioning or it is dropped or damaged
in any manner. Inspect the circulator periodically.
The circulator should not be electrically supplied if there is water on parts not
intended to be wet.
4. Risk of scalding.
To avoid injury before any servicing operation wait until the water has cooled
inside the circulator. Do not touch the fluid or the circulator when temperature
is higher than 60°C.
Important safety and installation instructions
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Energy saving es2 adaptEnergy saving es2 solarEnergy saving es2 pure

Table of Contents