Product Information; Description Of The Product; Type Key - Askoll ENERGY SAVING ES2 Installation And Operation Instructions Manual

ENERGY SAVING

6 Product information

6.1 Description of the product

The Askoll ENERGY SAVING are a range of innovative wet rotor circulators with an integrated
frequency converter (INVERTER). Askoll ENERGY SAVING circulators combine an advanced
hydraulic system, a high efficiency motor, an intuitive electronic control and an operating software
that allow to perfectly adapt to the various operating conditions and the actual needs of the system.
The motor with electronic control module is mounted on the pump housing by four screws. The
criteria for differential pressure control depend on the set operating mode. In all operating modes,
the circulator adapts to the different loads of the system.
Askoll ENERGY SAVING provides excellent benefits:
1. Energy saving
2. Compact design
3. Ideal performance
4. Easy installation and adjustment
The Askoll ENERGY SAVING circulator range is available in the following versions:
ES2
ES2 ADAPT
ES2 SOLAR
ES2 PURE

6.2 Type key

Product information
10
Standard version with operating modes P, C and min-max.
Pump housing available in cast iron, plastic composite material (C) and
plastic composite material with air separator (C A)
Premium version with operating modes activeADAPT, P, C and min-max.
Pump housing available in cast iron.
Solar thermal systems version with operating modes P and min-max.
Pump housing available in cast iron.
Domestic hot water circulation systems with operating mode min-max.
Pump housing available in plastic composite material (C)