Setting A Static Ip Address; More Information; Registering Your Fusion Device; Cleaning The Device - Fusion Apollo MS-ERX400 Owner's Manual

1
Select > SETTINGS.
2
Select the name of this device.
3
Select NETWORK > DHCP CLIENT > SAVE.

Setting a Static IP Address

If the stereo is configured as a static IP, it is automatically
assigned the IP address of 192.168.0.1. You can change this IP
address.
If the stereo is a DHCP client on the network and you do not
want the DHCP server to automatically assign an IP address to
the stereo, you can set a static IP address.
NOTE: Every device on the network must have a unique IP
address. If you select a static IP address that is the same as the
IP address on the network, the devices will not work properly.
1
Select > SETTINGS.
2
Select the name of the remote control.
3
Select NETWORK > STATIC IP.
4
Select an option:
• To set the IP address, select IP, and enter the IP address.
• To set the subnet mask, select MASK, and enter the
subnet mask.
NOTE: The subnet mask must match all other devices on
the network to work properly. A typical subnet mask is
255.255.255.0.
• To set the default gateway IP address, select GATEWAY,
and enter the gateway IP address.
NOTE: The default gateway is typically set as the IP
address of the DHCP server on the network.
5
Select SAVE.

More Information

Registering Your Fusion Device

Help us better support you by completing our online registration
today.
• Go to fusionentertainment.com.
• Keep the original sales receipt, or a photocopy, in a safe
place.

Cleaning the Device

1 Dampen a soft, clean, lint-free cloth with fresh water.
2 Gently wipe the device.

Software Updates

You must update the software for this device using a connected
compatible stereo or using the Fusion-Link
For best results, you should update the software in all Fusion
devices regularly.
Updating the Remote Control Software Using a USB
Flash Drive
You can update the remote control software using a USB flash
drive through a compatible stereo on the network.
Do not turn off the device or disconnect the power during a
software update. Turning off the power during a software update
may cause the device to become unresponsive.
NOTE:
• You cannot update the software using a USB flash drive
formatted using the NTFS file system. If you encounter
problems updating the device, format the USB flash drive
using FAT32 and try the update process again.
4
app.
™
NOTICE
• The device may restart a few times when updating. This is
normal.
• You can program only newer versions of software on the
device.
1
Go to the page for your device on
/marine and select Product Support > Software Updates >
Download.
2
Extract contents of the .zip file to the root of your USB
storage device.
The contents of the software update are contained in a folder
named Garmin.
3 Insert the USB storage device in the USB port of a
compatible Fusion PartyBus stereo on the network.
4
On the ERX400, select
5
Select the name of the remote control.
6
Select UPDATE > ERX REMOTE.
TIP: If the stereo with the USB storage device has a screen,
you can also start the remote control update process form the
UPDATE settings menu of the stereo.
The stereo transfers the update file to the remote control over
the network, the remote control updates the software, and
then restarts.
Updating the Remote Control Software Using the
Fusion Link App
You must connect the Fusion-Link app to the network using a
wireless router or wireless access point to update the software.
You cannot update the software using a Bluetooth connection.
If the Fusion PartyBus network has a wireless router or wireless
access point, you can update the remote control software using
the Fusion-Link app, available for compatible Apple
SM
on the Apple App Store or the Google Play
Do not turn off the device or disconnect the power during a
software update. Turning off the power during a software update
may cause the device to become unresponsive.
NOTE:
• The device may restart a few times when updating. This is
normal.
• You can program only newer versions of software on the
device.
1
Connect your mobile device to a wireless router or wireless
access point on the Fusion PartyBus network.
2
Open the Fusion-Link app, and verify that you can see the
remote control in the app.
3
If the Fusion PartyBus is not connected to the internet,
disconnect the mobile device from the wireless router or
access point.
4
In the Fusion-Link app, select
MS-ERX400 > Download.
The app downloads the software update file.
5
If the Fusion PartyBus is not connected to the internet, after
the app finishes downloading the update file, reconnect the
mobile device to the wireless router or access point on the
Fusion PartyBus network.
6 In the Fusion-Link app, select the name of the remote control.
7 Select > GENERAL > Software Updates > Online
Software Update.
The app transfers the software update to the remote control
over the Wi‑Fi ® network, the remote control updates the
software, and then it restarts.
fusionentertainment.com
> SETTINGS.
or Android
®
™ store.
NOTICE
> CHECK FOR UPDATES >
More Information
™