Picture 10: Graph With Default Settings - Deprag ME6000 Operating Instruction

The settings for delay and trigger influence the graph depiction. A delay of zero mea ns
that every measured value will be displayed on the graph.

Picture 10: Graph with default settings

The delay value can be directly entered or altered using the arrow keys. If the delay
value is set to 1, the amount of displayed measu rement values is reduced by half (the
m aximum is determined from every two successive values). By a delay value of 5 it is
reduced to a sixth. Then the maximum from every six successive values is displayed in
the graph.
Values between 0 and 10 can be chosen as delay.
Picture 11: Graph with delay = 5
The trigger setting also influences the graph depiction. A trigger va lue of zero causes
im mediate recording of values. A higher trigger value means that graph recording only
23