Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Heras B360
Summary of Contents for Heras B360
- Page 1 Instruction Manual Instruction Manual Instruction Manual Instruction Manual Manual Swing Gates Gate Identification Number ………………………………….. Date of Issue ………………………………….. Issue Date Description Author Approved First Issue R. Keleman P Griffin...
-
Page 2: Table Of Contents
Contents Introduction Contacting us Declaration of Conformity Declaration of Incorporation Warranty Disclaimer Copyright Material Transport and Installation Maintenance of hot dipped Galvanised Product 10. Repair procedure for Hot Dipped Galvanised Products 11. Maintenance of powder coated materials 12. Repair of powder coated materials 13. -
Page 3: Introduction
Introduction The gate supplied is part of the Heras UK Perimeter systems. It is designed to be installed within 1 day and all safety devices are factory fitted and working. If any extra equipment is required for the individual site, such as remote open and close, or automobile protection, this can be obtained from Heras UK and must be installed by qualified personnel. -
Page 4: Declaration Of Conformity
For and behalf of the manufacturer: Name: Paul Griffin Position: Operations Manager Signature: Important Note: Modifications to the equipment will render this document null and void Heras U.K. Fencing Systems is a Business Division of CRH Fencing & Security Group Limited. Cert number 890... -
Page 5: Declaration Of Incorporation
This document is to be completed by the installer where the gate has not been installed directly by the manufacturer Heras U.K. Fencing Systems. The installer and/or maintenance provider must ensure that any changes to the system are approved. -
Page 6: Disclaimer
7. Copyright The Copyright of this Manual remains the property of Heras UK at all times. This Manual may not be reproduced by any means without prior written permission from Heras UK. - Page 7 The gates can now be adjusted using the adjustable hangings to ensure that they are level. Top Hanging Bottom Hanging Adjuster nuts The ground tubes can now be marked and drilled. The ground tubes supplied should be grouted within the holes that have been drilled. 9.
-
Page 8: Maintenance Of Hot Dipped Galvanised Product
10. Maintenance of hot dipped Galvanised Product The following information offers some guidance on the general care and maintenance of hot dip galvanized steel products. Avoid long periods of exposure of your galvanized steel product to environments where the pH is below 6 and above 12. -
Page 9: Repair Procedure For Hot Dipped Galvanised Products
The car and truck cleaners are made to minimise corrosion on the metallic parts of vehicles so are generally suitable for use on galvanized steel although it is important that the steel be washed down with freshwater after cleaning. Often, water draining from other adjacent steelwork that is rusting can flow on to galvanized steel and cause conspicuous brown staining. -
Page 10: Maintenance Of Powder Coated Materials
12. Maintenance of powder coated materials There are no surface coatings for a system suited to external fencing which requires no attention at all. However, the powder coating system requires only minimal care to guarantee the extended life of the fence. After installation the following guidelines should be followed to protect the long term good looks of the fence: Cleaning It is recommended that cleaning should be carried out at around 6 month intervals for best... - Page 11 16. Installation Notes...
-
Page 12: Maintenance Record
17. Maintenance Record Maintenance undertaken Date Sign...
Need help?
Do you have a question about the B360 and is the answer not in the manual?
Questions and answers