Software Parameters - Elsat iNode Instruction Manual

iNode Energy Meter – instruction manual
5. Technical information
Radio parameters:
• RX / TX:
◦ BLE: 2402-2480 MHz
• output power (maximum):
◦ BLE: + 8dBm or + 20dBm
• modulation:
◦ BLE: GFSK
• antenna:
◦ internal PCB

Software parameters:

• configurable from a PC:
◦ power with which the device works in the range from -18 dBm to + 8 / 20dBm (depending on the device
version);
◦ device name;
◦ meter constant and its initial value;
◦ mask of channels used for broadcasting;
◦ broadcast frame data and with the answer to the query in imitation mode of another BLE device;
◦ user password;
◦ device access password; independent of the user's password, the password for authorizing the application
on a smartphone or PC (protects against copying it and against use by another client);
Power supply:
• CR2032 or 14250 (1/2 AA) or CR2 battery;
Housing:
• plastic;
◦ dimensions:
◦ CR2032: Ø 32 mm x 9.5 mm;
◦ 14250: Ø 39 mm x 38 mm;
◦ CR2 / 14250: 52mm x 32 mm x 19 mm;
Others:
• signaling by means of LEDs:
◦ work in broadcast mode
◦ scanning by another BLE device
• working temperature: from -20 to 45 ° C;
• humidity: 20 - 80% RHG;
• weight: 5 - 30 g;
Depending on the device version, it has one of the following sensors:
optical passive – photo-transistor:
•
view angle: ±12 °;
◦
spectral range: 620 nm – 960 nm;
◦
frequency: 50Hz max.;
◦
• magnetic field – Hall sensor:
◦ sensitivity: 700μT typ., T typ., 1100 μT typ., T max.;
◦ type: omnipolar sensing- activates with either pole from a magnet;
◦ frequency: 5 Hz max.;
• optical active – reflective:
built-in visible light cut-off filter;
◦
Equipment:
• CR2032 or 14250 (1/2 AA) or CR2 battery depending on the housing;
Software:
• Windows NT/XP/Vista/7.0/8.0/8.1/10.0;
• Linux;
• Android;
Chipset:
ELSAT s.c.
Page 22