Advertisement
Quick Links
Advertisement
Related Manuals for Elsat iNode
Summary of Contents for Elsat iNode
- Page 1 Serial Transceiver USB Instruction manual ® © 2015-2016 ELSAT...
- Page 2 Because it is seen as a PC's serial port, you can use it in your own programs, to communicate in a simple way with the BLE type devices e.g. iNode. To control BLE devices it uses a basic set of HCI commands HEX-encoded transmitted character strings.
- Page 3 Setup will find all nearby iNode devices and sort them regarding receiving signal strength. Each type of iNode device has a different icon. For iNode Serial Transceiver USB it is the first picture in the first row in the window below.
- Page 4 Serial Transceiver USB – instruction manual ELSAT s.c. At the top of the window there is displayed following information: the name of the iNode family – in this case iNode Serial Transceiver USB; the unique device identifier;...
- Page 5 ELSAT s.c. The picture below shows the Security tab: The following items can be set: Connection is possible from this computer only: this option enable you to protect the iNode Serial Transceiver USB access from others PCs or phones.
- Page 6 Baud rate: select the speed of the physical UART connectors on the module. The default speed for iNode Serial Transceiver USB is 921,600 bps. It can be set in the range from 2400 bps to 3,686,400 bps. Frame: specifies the parameters of the frame data byte-the number of bits, parity and number of ...
- Page 7 The fep files with the firmware, manuals or other information you can find at our technical support: http://support.inode.pl/ user: inode no password. All iNode devices use to communication the Bluetooth 4.0/4.1 standard. More information about it you can find at https://www.bluetooth.org/en-us/specification/adopted-specifications The data structure is described in Core_V4.0.pdf: Volume 2 Part E, Section 5.4.
- Page 8 Serial Transceiver USB – instruction manual ELSAT s.c. Attribute PDU Attribute Parameters Name Opcode Exchange MTU Request 0x02 Client Rx MTU Exchange MTU Response 0x03 Server Rx MTU Find Information Request 0x04 Starting Handle, Ending Handle, UUID Find Information...
- Page 9 Serial Transceiver USB – instruction manual ELSAT s.c. Data sent over the UART is HCI frames HEX-encoded (for one byte there are two ASCII characters). At the end of the data being transmitted is always 0x0d, 0x0a. In the case of loss of synchronization on the HCI frame level, you can retrieve it by sending 0x0d, 0x0a.
- Page 10 Serial Transceiver USB – instruction manual ELSAT s.c. AD - RSSI[i] = 0xAD -> RSSI = -83dBm (signed integer); Range: -127 < N < +20 dBm; 127 RSSI is not available HCI frame with BLE scan result (response for an active scan):...
- Page 11 Serial Transceiver USB – instruction manual ELSAT s.c. SENSOR_ALARM_CONTACT_CHANGE=16, SENSOR_ALARM_MOVE_STOPPED=32, SENSOR_ALARM_MOVE_GTIMER=64, SENSOR_ALARM_LEVEL_ACCELEROMETER_CHANGED=128, SENSOR_ALARM_LEVEL_MAGNET_CHANGE=256, SENSOR_ALARM_LEVEL_MAGNET_TIMER=512 1700 -> 0x0017 value1 /* motion sensor */ 0x8000 sensor in move (bit 15 =1) bity 14 do 10: X-axis (5 bits signed) -> 0x00= 0 bity 9 do 5: Y-axis (5 bits signed) ->...
- Page 12 UART. It only broadcasts BLE advertisement frames for 60 seconds after pressing the button twice. In UART_SERVICE_MODE_SLOW_ADVERTISING, which in iNode Setup.exe is called as standby mode the module broadcasts BLE advertisement frames all the time. In this mode may not be possible to send BLE scan HCI command.
-
Page 13: Technical Information
Serial Transceiver USB – instruction manual ELSAT s.c. Technical information Bluetooth Low Energy: configurable from your PC: ◦ the power with which the device operates in the range of-18 dBm + 8 dBm (maximum range up to 200 m in open space);... - Page 14 Serial Transceiver USB – instruction manual ELSAT s.c. Disposal All the packaging materials are recyclable and are labeled as such. Dispose of the packaging in accordance with local regulations. Keep the materials out of children reach, as the materials can pose a hazard.
- Page 15 Serial Transceiver USB – instruction manual ELSAT s.c. DECLARATION OF CONFORMITY 3/2/2015 (according to ISO/IEC Guide 22) Producer: ELSAT s.c. Address: Warszawska 32E/1, 05-500 Piaseczno k/Warszawy POLAND Declares that the product: iNode Serial Transceiver USB Product: iNode:0x0b11 Model: Conforms to the following Product Specifications and Regulations: PN-EN 60950-1:2007/AC:2012 PN-ETSI EN 301 489-1 V1.9.2:2012...
Need help?
Do you have a question about the iNode and is the answer not in the manual?
Questions and answers