Canon DP-V3120 Setup Manual page 7

Video display
Hide thumbs Also See for DP-V3120:
Table of Contents

Advertisement

When Using the Main Unit
• The screen may be damaged if it is left facing
strong source of light. Please take precautions
when placing it near a window.
• Do not press firmly on the screen, scratch it or
place an object on the screen. It can cause non-
uniformity or damage to the panel.
• The screen and cabinet may become warm during
use. Note this does not constitute a malfunction.
• Viewing the display for prolonged periods of time
may lead to eye strain or decreased vision. Please
ensure to take rest periodically to avoid these
symptoms.
• Refer to Recommendation ITU-R BT.1702
"Guidance for the reduction of photosensitive
epileptic seizures caused by television" and related
guidelines.
About Backlight
The backlight has a limited service life so its brightness
may degrade and color may change due to aging.
About Temporary Screen burn-in
If a stationary image is displayed for a prolonged period,
screen burn-in may occur where you see remnants of
what was displayed. This is a characteristic of LCD and
is not a failure. However, this is only temporary and will
disappear when playing video.
About the LCD screen
The screen is produced using extremely high-precision
manufacturing techniques, with more than 99.99% of
the pixels operating to specification. Less than 0.01% of
the pixels may occasionally misfire or appear as black,
red, blue or green dots. In addition, this tendency may
increase through long term use due to characteristic of
the LCD panel. These do not constitute a malfunction.
Condensation
If this equipment is brought into a warm room while it
is cold or if the room is heated suddenly, condensation
may form on the surface or inside the equipment. Note
that the equipment may be damaged if it is used under
such condition.
If condensation has formed on the surface or inside
the equipment, do not use the video display as it may
get damaged. Turn the power off and wait until the
condensation has evaporated before using the video
display.
Safety Instructions and Handling Precautions
Cleaning
• Before cleaning, be sure to unplug the power plug.
• The screen has a special surface treatment, avoid
touching it directly with your hand. In addition,
never affix adhesive objects such as seals.
• Never use alcohol or benzene, thinner, acidic
cleaning solution, alkaline cleaning solution,
abrasive or chemical wipes because these will
damage the screen.
• If the screen is dirty, wipe gently with soft dry cloth
such as cleaning cloth or eye glasses cleaning
cloth. Wiping the screen too hard may cause
unevenness on the screen or damage the LCD
panel. The screen may be scratched if wiped too
hard with a cleaning cloth with foreign particles
attached.
• When the screen is extremely dirty, wipe with
soft cloth such as cleaning cloth or eye glasses
cleaning cloth moistened with water-diluted neutral
detergent.
• Use a blower to remove dust from the surface of
the screen.
• Wipe dirt on cabinet with a soft cloth. If the screen
is very dirty, use a moistened cloth with water
or mild detergent diluted with water. Do not use
alcohol, benzene, paint thinner, or pesticides
as they may damage the surface finish or erase
characters on the cabinet.
Disposing
• Do not dispose together with normal waste. Do not
include the video display in waste that will be taken
to landfill.
• Observe the rules and regulations of your local
authorities when disposing.
7

Advertisement

Table of Contents
loading

Table of Contents