Care And Maintenance - TECHWOOD TCO-6044 Instruction Manual

Note: Use larger opening when attaching guard.
Using The Eyebrow Trimmer Guard:
I. Attach guard to unit as shown using appropriate side.
2. Turn unit ON.
3. Comb, following the natural shape of the eyebrowstarting at the widest end to the
thinnest.
Important For thick and bushy eyebrows you mayhave a to repeat step 3 until
desired result is achieved.

CARE AND MAINTENANCE

To Clean Eyebrow Trimming Guard
I. Remove guard end use cleaning brush to remove hairsfrom the teeth.
2. Wash with soapy water if necessary
3. Make sure guard is completely dry before attaching tomain unit
To Clean Main Head Attachment
Use cleaning brush provided to remove any hairs
To Remove Hairs From Inside of Main Unit Head
I. Make sure unit is in the OFF position.
2. Turn to the backside of the unit (This side is the opposite side of thepower switch).
3. Push lock down to unlock main head
Note: Main headshould pop off from main unit.
4. Pull head down and remove from main unit
5. Remove hairs with cleaning brush
6. Replace head by inserting theprotruding edge into the opening on the top of the
head
Note: Do not force head into place.
7. Snap into place and secure by pushing the lock button up until it clicks and
lockshead in place.
Power supply : 1 x 1,5V LR3 or AAA battery (not provided)
16