Care And Maintenance - TECHWOOD TCO-6025 Instruction Manual

I. Turn unit on by pushing the ON/OFF switch upward in the direction of arrow
2. Gently, Place the head against the hair to be removed.
3. Move in an upward direction against the growth ofhair to be removed.
Note: Use for all designated areasof the body
Attaching Eyebrow Trimming Guard
Note: Try long side first to determineappropriate side of attachment. If the long side
is not performing then try the short side. We recommend always testing the long side
first.
I. Make sure the unit is in the OFF position.
2. Race fingers on the neck of the main unit
3. Attach guard over main bead, push downand snap into place.
Using The Eyebrow Trimmer Guard :
I. Attach guard to unit.
2. Turn unit ON.
3. Comb, following the natural shape of the eyebrowstarting at the widest end to the
thinnest.
Important For thick and bushy eyebrows you mayhave a to repeat step 3 until
desired result is achieved.

CARE AND MAINTENANCE

To Clean Eyebrow Trimming Guard
I. Remove guard end use cleaning brush to remove hairsfrom the teeth.
2. Wash with soapy water if necessary
3. Make sure guard is completely dry before attaching tomain unit
To Clean Main Head Attachment
Use cleaning brush provided to remove any hairs
I. Make sure unit is in the OFF position.
2. Turn to the backside of the unit (This side is the opposite side of thepower switch).
3. Push lock down to unlock main head
Note: Main headshould pop off from main unit.
13