Specifications - TECHWOOD TCO-6044 Instruction Manual

Appliance doesn't work
Cause 1: The rechargeable battery in empty. a Recharge the buttery
Appliance doesn't charge
Cause 1: Charging unit in not plugged in
Cause 2: Appliance has not been placed properly in the charging unit.
a Put the appliance in the charging unit in such a way that you hear a click (to
indicatethat the shaver has been placed properly in the charging unit) and the red
pilot lightgoes on (to indicate that the appliance in charging)
Cause 3: The red pilot light in on, but the appliance in still not charging.
a Switch the appliance off by setting the slide to off and charge theappliance.
AC ADAPTER
LADY SHAVER
The characteristics can change without preliminary preventing
For additional protection, the installation of a residual current device with a rated
residual operating current not exceeding 30 mA is advisable in the electrical circuit
supplying the bathroom. Ask your installer for advice.
CAUTION: In order to minimize the risks of electric shock, In the event of
breakdown, not to open the case but to call upon a qualified technician for
repairs.
This apparatus satisfied EC directives, it was controlled according to all the
European current directives, like: electromagnetic compatibility (EMC) and low
tension (LVD).

SPECIFICATIONS

INPUT
OUTPUT
NORM
POWER SUPPLY
NORM
OPERATING
USING
230V~50Hz
2,4V DC / 60mA
Class II
1 rechargeable Battery AA
1,2V DC / 600mA
Class III
10H CHARGE
+/- 30 Minutes
11