Notice for users in Australia
For safety reasons, only connect headsets with a telecommunications
compliance label. This includes customer equipment previously labelled
Permitted or Certified.
Notice for users in New Zealand
For a modem with approval number PTC 211/01/030:
The grant of a Telepermit for any item of terminal equipment
indicates only that Telecom has accepted that the item complies
with minimum conditions for connection to its network. It
indicates no endorsement of the product by Telecom, nor does it
provide any sort of warranty. Above all, it provides no assurance
that any item will work correctly in all respects with another item
of Telepermitted equipment of a different make or model, nor
does it imply that any product is compatible with all of Telecom's
This device is equipped with pulse dialling while the Telecom
standard is DTMF tone dialling. There is no guarantee that
Telecom lines will always continue to support pulse dialling.
Use of pulse dialling, when this equipment is connected to the
same line as other equipment, may give rise to a bell tinkle or
noise and may also cause a false answer condition. Should such
problems occur, the user should NOT contact the Telecom Fault
This equipment may not provide for the effective hand-over of a
call to another device connected to the same line.
Under power failure conditions, this appliance may not operate.
Please ensure that a separate telephone, not dependent on local
power, is available for emergency use.
Some parameters required for compliance with Telecom's
Telepermit requirements are dependent on the equipment (PC)
associated with this device. The associated equipment shall be set
to operate within the following limits for compliance with
Telecom's specifications, and the associated equipment shall be set
to ensure that calls are answered between 3 and 30 seconds of
receipt of ringing.
This equipment shall not be set up to make automatic calls to
Telecom's 111 Emergency Service.
Appendix A Regulations and Safety Notices