Port Replicator Installation Instructions The port replicator is designed to connect to the Extensa™ computer and duplicates all of the ports on your computer plus additional ports. The port replicator allows you to have an easy one step connect/disconnect to the various cables in the back of your computer.
Port Replicator Installation Instructions DC In Connects the AC adapter output connector to this jack to recharge the battery and supply power to the computer. Caution: Use only the supplied AC adapter with your computer. Other adapters can cause serious damage to the electronic circuits.
Port Replicator Installation Instructions Connecting the Port Replicator To connect the port replicator, align the right and left sides of your computer to the corresponding edges of the port replicator. Slide the port replicator towards the computer, being careful to also align the port replicator connector and the guide pins on the connector to the connector on the back of the computer.
Port Replicator Installation Instructions Disconnecting the Port Replicator To detach the port replicator, press the two release levers on both sides, then push back to disconnect the option from the computer. Disconnecting the Port Replicator...