Page 2
Serial number: ___________________________________ Purchase date: ___________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies product names or trademarks are used herein for identification purposes only and belong to their respective companies.
Connecting to a power supply Connecting to a notebook PC Pull out the connector from the connector slot and remove the cap Align the connector with the designated port on the notebook PC and push firmly...
Page 4
Acer ezDock. Press the releasing catches on both sides of the connector as shown and pull gently to detach the Acer ezDock from the notebook PC. Cover the connector with the cap and return it to the connector...
An Acer ezDock tour After setting up your Acer ezDock and the power suppy as illustrated , let us show you around your new Acer ezDock. Front view Item 1& 2 Universal PS/2 Keyboard / mouse connector Modem port Serial port...
Item Security keylock S-video Microphone in jack S/PDIF output jacks (for digital audio equipment). Power indicators Rear view Item 124 pin connector, connects to the expansion port of a Notebook PC Connector cap, protects the connector when not in use. Item DVI-D Port (for Digital visual input)
Left view Item PC Card slot To insert a PCI express card, push the card gently until it clicks. To eject, push the card gently until it clicks. Allow it to spring back before pulling. Item Item PC Card eject PCI Express™...
Features Below is a brief summary of the Acer ezDock’s many features: Performance Simple one plug design - easy to connect • System power can be supplied from Acer ezDock • • Communicates with the system by a connector, 120 signal pins and...
Special notice The usage guide below shows the ports available for use once Acer ezDock is connected to a Notebook PC. Functions Both Acer ezDock and system ports available 1394 PCMCIA New Card Modem Line-In HP-Out Mic-In Parallel SPDIF-Out TV-Out...
FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Appendix A Regulations and Safety Notices Operating conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service. If this equipment should fail to operate properly, disconnect the equipment from the phone line to determine if it is causing the problem.
Notice for users in Australia For safety reasons, only connect headsets with a telecommunications compliance label. This includes customer equipment previously labelled Permitted or Certified. Notice for users in New Zealand For a modem with approval number PTC 211/01/030: The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network.
Important safety instructions Read these instructions carefully. Save them for future reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Page 18
If the product has been exposed to rain or water. If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.
Page 19
2005/1/17 --------------------------- ------------------ Easy Lai/ Director Date Qualification Center Product Assurance, Acer Inc. Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan, R.O.C. Tel : 886-2-2696-1234 Fax : 886-2-2696-3535 www.acer.com...
Page 20
Address of Responsible Party: Contact Person: Phone No.: Fax No.: Appendix A Regulations and Safety Notices Declaration of Conformity Docking Station Acer ezDock Acer America Corporation 2641 Orchard Parkway, San Jose CA 95134, U. S. A. Mr. Young Kim 408-922-2909 408-922-2606...
Need help?
Do you have a question about the ezDock and is the answer not in the manual?
Questions and answers