Start Up The Acer P600 Series Portable Navigator - Acer P600 Series User Manual

First things first

Start up the Acer p600 Series Portable Navigator

Start up the Acer p600 Series Portable Navigator
1
2
1
2
3
4
5
xviii
Before mounting the Acer p600 Series Portable Navigator on your vehicle, you should
first calibrate the screen. After screen calibration, proceed to system settings
configuration.
To turn on and calibrate the device:
Turn on your device for the first time by sliding the power switch to the right. The
power switch is located at the bottom of the device. See "Top and bottom views" on
page x if you have any difficulty finding this switch.
When you first turn on your device, you will be asked to calibrate the screen. This process
ensures that when you tap the screen the item tapped is activated.
NOTE: After powering your device on for the first time, you should not use the power switch
unless you want to do a hard reset. See "Performing a hard reset" on page 33 for more
information. Instead, use the power button at the top of the device.
Follow the instructions on the screen.
After calibrating the screen, the Main Menu screen displays. This is also referred to as the
Home screen.
To configure system settings:
If you intend to start using your Acer p600 Series Portable Navigator at once, we
recommend that you configure the language and date/time settings first. The rest of
the user preferences can be set up later.
Tap Settings on the Main Menu panel.
To set the system language settings, tap Language.
• Tap the down arrow beside the Text and Voice settings and choose the
language you prefer.
To set the system date and time, tap Date/Time.
Tap Date.
• Tap + or - beside the Year, Month, and Day settings to set the date values.
Tap Time.
• Tap + or - beside the Hour and Minute settings to set the time values.