Start Up The Acer E300 Series Travel Companion - Acer E300 Series User Manual

First things first
The power LED indicator lights up orange during charging.

Start up the Acer e300 Series Travel Companion

Before mounting the Acer e300 Series Travel Companion on your vehicle,
you should first calibrate the screen. After screen calibration, proceed to
system settings configuration.
To turn on and calibrate the device:
Turn on your device by pressing the power button
1.
right panel of the device.
When you first turn on your device, you will be asked to calibrate the
screen. This process ensures that when you tap the screen the item
tapped is activated.
Follow the instructions on the screen.
2.
After calibrating the screen, the Main Menu panel displays. This is also
referred to as the Home panel.
16
If the car engine is turned off, you may be required to switch the vehicle ignition back
into the Accessories position. Consult your vehicle owner's manual.
The device comes with the battery pre-charged to at least 30% capacity. You can start
using it once it is mounted in your vehicle and connected to the cigarette lighter.
However, for maximum usage time you need to charge your device to full capacity. Go
to the "Recharging the device" section for instructions.
on the front
Acer e300 Series Travel Companion