Table of Contents
Advertisement
Acer p600 Series Portabl e Navigator fundamentals
Hardware interface
1
2
2
To insert an SD/MMC card:
•
Hold the device securely; then push the card into the slot until you hear an
audible system sound; this will signal that the card is already properly seated
within the slot. The card is secure when it is not protruding from the slot.
To remove a storage card:
Hold the device securely; then push against the top of the card, as if you were pushing
it further into the slot, letting the card spring out. An audible system sound will signal
that the card has been released.
Gently remove the card from the slot.
Advertisement
Table of Contents
