Table of Contents
Advertisement
Choosing the charging curve.
•
It is extremely important to choose the correct charging curve, one which is
appropriate for the battery type. An incorrect choice could cause irreversible
damage.
•
This is particularly true for charging curves where the charging voltage is higher
than the manufacturers' recommended voltage levels.
•
There is a high risk of overheating and emission of noxious gases
•
Charging curve 4 is compatible with LiFeSo4 batteries that have a BMS (battery
management system) installed.
•
It is essential to consult the battery manufacturer's recommendations.
Maintenance precautions.
•
This device cannot be dismantled and thus the PC board is inaccessible. It is
strictly forbidden to dismantle the housing for any reason. Electric shock is
possible.
•
In order to prevent risk of electric shock during maintenance, please follow
closely all recommendations below before any maintenance begins.
•
Any operation carried out to this effect must be carried out by an authorized
electrician.
•
In the event of damaged wires or cables, these must be replaced by an
authorized electrician. The end user must not attempt to change them.
•
The incoming power and battery connections must be disconnected before any
work is carried out in order to avoid transfer of energy
•
Fuses must be replaced by fuses that have the same characteristics and
performance levels.
5
Advertisement
Table of Contents
