Table of Contents
Advertisement
WARRANTY
In order to prevent all risks arising due to the incorrect use of this device, please
carefully read the list of possible situations or faults that are not covered by the
warranty.
If the charger is dropped or experiences a hard impact, irreversible damage of the
ventilation system and certain electrical components may result.
Modifications made to the casing (and in particular if holes are bored), may result in the
deposit of metallic shavings or filings onto the electronic card and consequently may
cause the malfunction of or damage to the device.
Interfering with or modifications made to the PC Board may result in unforeseen
operations and consequently may cause the malfunction of or damage to the device.
Use of a non-adapted power supply (as a general rule, the input voltage will be too high)
may cause the malfunction of or damage to the device.
Over voltage from the main supply power or a lightning strike will usually cause
irreversible damage to the PC Board.
Replacement of battery fuses with fuse types other than those recommended (same
characteristics) may cause the malfunction of or damage to the device.
Obvious connection errors will result in the mal-function of or damage to the device.
Water gaining access to the interior of the device may cause the malfunction of or
damage to the device.
Warning: Choosing the charging curve.
It is extremely important to choose the correct charging curve. Select one which is
appropriate for the battery technology. An incorrect choice could cause irreversible
damage.
This is particularly true for charging curves where the charging voltage is higher than the
manufacturers' recommended voltage levels.
Overcharging may result in a high risk of overheating and emission of noxious gases from
the batteries.
Charging curve 4 is compatible with LiFeSo4 batteries that have a BMS (battery
management system) installed.
It is essential to consult the battery manufacturer's recommendations for charging.
11
Advertisement
Table of Contents
