Installing The Bottom Shelf; Adding Wheels To The Cart; Installing The Cart Front Panel; Securing The Lid Stopper - Pit Boss PRO Series Assembly And Operation Manual

2. INSTALLING THE BOTTOM SHELF

Parts Required:
1 x Bottom Shelf (#20)
4 x Screw (#A)
4 x Washer (#B)
4 x Locking Washer (#C)
Installation:
• Mount the Bottom Shelf to each Support Leg using a screw, locking
washer, and washer. Ensure the flat surface of the shelf is facing up
towards the Grill Barrel.

3. ADDING WHEELS TO THE CART

Parts Required:
2 x Wheel (#21)
2 x Wheel Cotter Pin (#E)
2 x Wheel Washer (#F)
2 x Wheel Axle Pin (#G)
Installation:
• Attach each Wheel to each Right Support Leg by inserting the Wheel
Axle Pin through the Wheel, Support Leg hole, Wheel Washer, then
secure using the Wheel Cotter Pin.
• Once the shelf is secure, carefully lift the grill into an upright position.
IMPORTANT: Re-tighten the support leg screws to ensure they are
completely secure after positioning the grill upright.

4. SECURING THE LID STOPPER

Parts Required:
1 x Lid Stopper (#3)
Installation:
• Secure the Lid Stopper onto the top of the Main Barrel using the
pre-installed screw on top of the Main Barrel.
8
2
20
3
G
F
E
E
21
F
4
3
G
21