Levoit True HEPA Vital 100 Series User Manual page 10

CARE & MAINTENANCE (CONT.)
Resetting the Check Filter
Indicator
Reset the Check Filter Indicator when:
lights up.
A.
Replace the air filter (see page 11).
1.
2. Turn on the air purifier.
3. Press and hold
4. will turn off when successfully
reset.
B. The filter was changed before
lit up.
Press and hold
1.
This will turn on
2. Press and hold
seconds.
3. will turn off when successfully
reset.
10
for 3 seconds.
for 3 seconds.
.
again for 3
Figure 2.1
Cleaning the Filter
The Pre-Filter should be cleaned once a
month to increase efficiency and extend the
life of your filter.
Remove the filter from the housing and
1.
clean the Pre-Filter with a soft brush or
vacuum hose to remove hair, dust, and
large particles.
2. Carefully peel the Pre-Filter away from
the True HEPA and Activated Carbon
Figure 2.1
Filters. [
3. Gently wash the Pre-Filter under running
water. Dry completely before placing it
back on the velcro tape.
4. Replace filter in housing.
Note: Do not clean the True HEPA and
Activated Carbon Filters.
When to
Filter
Clean
Vacuum
every 2–4
weeks
Pre-Filter
Wash every
1–2 months
True HEPA
& Activated Do not
Carbon clean
Filter
]
When to
Replace
6–8 months