Protect - Acer CR-5130 User Manual

Protect

This function gives the image protection from erasing. Follow the steps below to
perform the protect functions.
1. Set the mode dial to [
2. Press the MENU button.
The menu screen appears.
3. Select the Protect by using the
and press the SET button.
4. Protect submenu appears, including Single, All and
Select. Use the
them and press the SET button to confirm.
5. Use the or ‚ button to select the desired setting and press the SET button.
In Single/All submenu, use the
press the SET button.
[Set]:
[Cancel Protect]:Cancel image protection.
[Exit]:
If "Select" is selected, thumbnail display appears on the LCD monitor. Use
the , , or
select lock/unlock and press the SET button to confirm.
] and power on the camera.
or
or button to select one of
or
The one image displayed on the LCD monitor is locked and
[ ] is displayed on the LCD monitor.
Exit from the menu screen.
button to select the image and press the [
button
button to select the desired setting and
] button to
55