Table of Contents
Advertisement
1
Turn off the projector and unplug the power cable.
2
Turn the projector over so you can
access the lamp cover.
3
Remove the access panel screws and
open the panel.
4
Remove the screws on the bottom of
the lamp assembly.
5
Grasp the lamp handle and pull the
lamp assembly directly out of the
projector.
6
Replace with the new lamp.
7
Place back the screws on the bottom
of lamp assembly.
8
Place the panel and screw back the
screws on the lamp cover.
Note:
Be sure not to touch the optical surfaces with your fingers. Lint-
free gloves or finger cots are recommended.
Do not put your hands into the lamp replacement spot, or not fall
any liquid or object into it to avoid electrical shock or fire.
Be sure to turn off the projector and unplug the power cord
before replacing thelamp.
31
Advertisement
Table of Contents
