Table of Contents
Advertisement
Changing settings procedure (using either the Projector Control Panel
or the Remote Controller):
1
Press the MENU button to
display OSD menu.
2
Press the
select PICTURE menu.
3
To enter the sub-menu
setting, press the
or the MENU button.
4
Press the
select the sub-menu item.
5
Press the
item.
6
After you have done with the adjustment of a sub-menu item:
a
To resume changing another sub-menu item: press the
button.
b
To exit from the current menu: toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Sub-Menu
Brightness
Contrast
PosiH
PosiV
Tracking
Sync
Sharpness
or
button to
button
or
button to
or
button to adjust the value of desired sub-menu
Description
The higher the setting, the brighter the image. The lower
the setting, the darker the image.
The higher the setting, the greater the contrast. The lower
the setting, the lower the contrast.
Adjusts the horizontal position.
Adjusts the vertical position.
Adjusts the horizontal pixel of the image.
Adjusts the dot phase of the input signal. Adjusts the
picture to where it looks best.
The higher the setting, the sharper the image. The lower
the setting, the softer the image.
18
or
Advertisement
Table of Contents
