Adjust image distortion caused by tilting projection. (±16 degrees)
Use this function to choose your desired aspect ratio.
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
4:3: The input source will be scaled to fit the projection screen
and becomes 4:3 ratio.
16:9: The input source will be scaled to fit the width of the screen
and narrowed the height to make the displayed image
becomes 16:9 ratio.
The factory default setting.
When you select this function, the projector turns the im-
age upside down for ceiling-mounted projection.
When you select this function, the projector reverses the
image so you can project behind a translucent screen.
When you select this function, the projector reverses
and turns the image upside down at same time. You can
project from behind a translucent screen with ceiling
(Computer / Video