Using the Remote Control
Four Directional Select Keys
Keystone + / -
Page Up (Computer mode only)
Page Down (Computer mode only)
Refer to the "Power On/Off the Projector" section on pages 11-12.
Display the "Display Mode" submenu of the onscreen display
menu to select display mode from PC, Movie, sRGB and User
Press "Menu" to launch the on screen display menu. To exit OSD,
press "Menu" again.
to select items or make adjustments to your
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
Momentarily turns off the audio.
Adjusts image distortion caused by tilting the projector ( 15
Use this button to page up. This function is only available when
the projector is connected to a computer via an USB cable.
Use this button to page down. This function is only available
when the projector is connected to a computer via an USB cable.
Automatically synchronizes the projector to the input source.
Momentarily turns off the video. Press "Hide" to hide image,
press again to restore display of the image.
Press "Source" to choose RGB, Component-p, Component-i,
S-Video, Composite Video and HDTV sources.
Press "Freeze" to pause the screen image.