Creating A Rip File (With Gloss Finish) - Roland IU-1000F Manual

Creating a RIP File (With Gloss Finish)

This section describes how to create a RIP file using SAi FlexiPRINT Production Manager 19. For information on
how to create files using other RIP software, contact the applicable software distributor.
IMPORTANT
When applying a gloss finish with gloss ink, the job using gloss ink must be different than jobs
using other inks. For gloss ink, select the "Standard 635 × 600" profile.
MEMO
• Selecting an output profile that is suitable for the color set used for spot color printing from the
general-purpose profiles available ensures output with optimal color management.
• For basic information on using the RIP software, such as how to set the media size and layout for print
data, refer to the Help manual included with the software.
Procedure
A
Read the print data to be set as the first job using the RIP software.
Add the print data as a RIP software job.
B
Double-click the added job.
Double-click to open the [Job Properties] window.
A
A
Gl (Gloss finish): Set as the second job, and then execute RIP.
W - 4C: Set as the first job, and then execute RIP.
Printing
11