Summary of Contents for Flowserve IPS-Beacon VB-105
Page 1
USER INSTRUCTIONS IPS-Beacon™ Installation Operation Condition monitoring and alert system Maintenance for vibration and temperature PCN = 26999949 03-13 (E). Original instructions. These instructions must be read prior to installing, operating, using and maintaining this equipment. 702-1001-01^-A...
These instructions are intended to facilitate products to help ensure their continued product quality familiarization with the product and its permitted use. and performance in use. As Flowserve cannot test Operating the product in compliance with these parts and accessories sourced from other vendors the...
If required the in transportation. Any shortage and/or damage must operator may commission the manufacturer/supplier be reported immediately to Flowserve and must be to provide applicable training. received in writing within ten days of receipt of the equipment.
These cells do not contain dangerous substances. The reaction products are inorganic and do not represent environmental hazards, once the decomposition or neutralization process has terminated. flowserve.com Page 5 of 16...
Warning: errors in programming can upon measurement intervals. render the IPS Beacon unit inoperable; proceed with caution. Flowserve is not liable for any damage 4.1 Tools required caused by programming errors. A typical range of tools that will be required to...
VB-101 Dock in a general purpose area classification. If you do not have a Dock, refer to section 8 Parts List and Drawings, for the Flowserve part number to obtain one. For details on connection to the Dock, refer to the Dock IOM (PCN 26999975) 5.3 Setting alarm set points...
Page 9
IPS BEACON ENGLISH 26999949 03-13 Figure 3: X-Y-Z axis orientation Figure 4: IPS Beacon drawing Figure 5: IPS Beacon mounting pad flowserve.com Page 9 of 16...
LED on the IPS Beacon flashes 3 times in quick placed over this tap and a 6 mm (¼ in.) stud inserted succession to signify the unit is turned on. through the IPS Beacon and threaded into the tap. flowserve.com Page 10 of 16...
IPS Dock and use the DockTalk software utility as described in section 5.2. If you cannot connect to the IPS Beacon unit, contact Flowserve factory for additional support. (See Figure 6: IPS Beacon LED lights section 10.2.) 3.
If none of the above solutions are successful, contact local sales personnel or the factory for additional support. Unit manufactured by: Flowserve Corporation 10920 W. Sam Houston Parkway N., Suite 950 Houston, TX 77064, USA Phone: +1-832-375-0807 flowserve.com...
IPS BEACON ENGLISH 26999949 03-13 11 DECLARATION OF CONFORMITY Note: The following is a “typical” IPS Beacon Declaration of Conformance. Declaration of Conformity Flowserve Corporation 10920 West Sam Houston Parkway North Suite 950 Houston, Texas 77064, USA Declare in sole responsibility that the equipment:...
Page 14
The technical documentation required to demonstrate that the product meets the requirements of the Directives has been compiled by the signatory below and is available for inspection by the relevant enforcement authorities. Signed: _____________________________________________ Date: _________________________ Authorized Person, Rick Lawson General Manager flowserve.com Page 14 of 16...
Page 15
IPS BEACON ENGLISH 26999949 03-13 Notes: flowserve.com Page 15 of 16...
Page 16
IPS BEACON ENGLISH 26999949 03-13 Your Flowserve factory contacts: FLOWSERVE REGIONAL SALES OFFICES: USA and Canada Flowserve Corporation Flowserve Corporation 5215 North O’Connor Blvd., 10920 W Sam Houston Parkway N, Suite 950 Suite 2300 Houston, TX 77064 USA Irving, Texas 75039-5421 USA...