Recording Presets - J.R. Clancy SceneControl 100 Operating Instructions Manual

RECORDING PRESETS

It is possible to record up to eight presets per winch on the system. A preset consists of a comment, a target and
Touchscreen display winch preset record screen
Once on this page, enter a preset number (1-8) by touching the ENTER PRESET NUMBER numeric field. A
keypad will open on the screen; touch the desired number (1-8) and then touch the ENTER key. The preset
record screen will re-appear, and the preset comment, target and speed will appear in the appropriate fields. If
the preset has not been previously recorded, these fields will be blank. If the preset has been recorded, and you
do not wish to write over this information, then select a different preset number.
Once the desired preset number has been selected, enter a comment describing the preset by touching the
ENTER PRESET COMMENT data field. An alphanumeric keypad will appear; use it to key in the comment,
followed by the ENTER key. The preset record screen will re-appear; enter the desired target and speed,
following the same procedure.
Once the preset information has been successfully entered into all fields, touch the PRESS TO RECORD button.
The prompt "ARE YOU SURE?" will appear, along with YES and NO buttons. Press the YES button to save the
preset, or the NO button to stop the save process.
The username and password will automatically log off after five minutes, to prevent unauthorized use. Touch the
BASE PAGE button at any time to return to the winch base page.
Design, Manufacture and Installation of Theatrical Equipment Worldwide
(315) 451-3440 Fax (315) 451-1766
Rev 1: February 13, 2007
SCENECONTROL 100 OPERATING INSTRUCTIONS
a speed. For fixed-speed winches, a preset
consists of a comment and target (no speed).
To record a preset, first open the Preset
Record screen by touching the PRESET
RECORD touchbutton on the winch base
screen. Preset recording is a password-
protected function. If a password is not
currently active, the login screen will pop up,
prompting you to enter a user name and
password using the on-screen keyboard.
To enter the user name, touch the user name
field; an alphanumeric keypad will appear.
Use this to key in the appropriate user name,
then press the ENTER key on the keypad.
Follow the same procedure in the password
field to enter the password.
When these have been successfully entered,
the winch preset record screen will appear.
www.jrclancy.com
PAGE 7