PAGE 11
SCENECONTROL 100 OPERATING INSTRUCTIONS
Appendix I: Troubleshooting
If an axis fails to operate, the first step is to check the winch status page for information on that machine. See the
status page sections of this manual for details.
OTHER PROBLEMS:
In case of problems operating the system, the attached document "Troubleshooting Powered Equipment" (JR
Clancy manual P359908) provides guidelines for troubleshooting. If trouble cannot be cleared using the steps
outlined in this document, contact J.R. Clancy, Inc. directly.
Design, Manufacture and Installation of Theatrical Equipment Worldwide
(315) 451-3440
Fax (315) 451-1766
www.jrclancy.com
Rev 1: February 13, 2007